Sy-C041 Guangzhou 12.1 inch portable patient monitor bedside monitor

SY-C041 Guangzhou 12.1 Inch Portable Patient Monitors Bedside MonitorFeature of patient monitor:12.1" color TFT screen Multi-channel display Big font interfaceST and arrhythmia analysisDrug dose calculation and titration tableOxyCRG dynamic view displayRespiration monitoring with apnea alarmsAlarm review, arrhythm

Featured Products

SY-C041 Guangzhou 12.1 Inch Portable Patient Monitors Bedside Monitor

Feature of patient monitor:

12.1" color TFT screen 
Multi-channel display 
Big font interface
ST and arrhythmia analysis
Drug dose calculation and titration table
OxyCRG dynamic view display
Respiration monitoring with apnea alarms
Alarm review, arrhythmia review 
Patient info. Input 
Anti-defibrillation design
NIBP over pressure protection
Plug-in rechargeable battery, AC/DC available. 
Supporting wire or wireless network.


Specification of patient monitor:

ECG

Lead Mode 5 Leads (R, L, F, N, C or RA, LA, LL, RL,V) 
Lead selection I, II, III, avR, avL, avF, V
Wavef orm 2 ch
Lead mode 3 Leads ( R, L, F or RA, LA, LL) 
Lead selection I, II, III,
Wave form 1 ch
Gain 2.5mm/mV, 5.0mm/mV, 10mm/mV,20mm/mV, auto

HR and Alarm Range Adult 15 ~ 300 bpm
Neo/Ped 15 ~ 350 bpm
Accuracy ±1% or±1bpm, which is greater
Resolution 1 bpm 
Sensitivity > 200 (uVp-p) 
Differential Input Impedance > 5 MΩ

CMRR Monitor > 105 dB 
Operation > 105 dB 
Diagnosis > 85 dB
Electrode offset potential ±300mV 
Leakage Current < 10 uA
Baseline Recovery < 3 S After Defi. 
ECG Signal Range ±8 m V ( Vp-p )

Bandwidth Surgery 1 ~ 20 Hz
Monitor 0.5 ~ 40 Hz
Diagnostic 0.05 ~ 130 Hz
Calibration Signal 1 (mVp-p), Accuracy:5%
ST Segment Monitoring Range Measure and Alarm -2.0 ~ +2.0 mV

ARR Detecting Type: ASYSTOLE, VFIB/VTAC, COUPLET, BIGEMINY, TRIGEMINY, R ON T, VT>2,BRADY, MISSED BEATS,
PNP, PNC,Alarm Available,Review Available


Respiration

Method Impedance between R-F(RA-LL)
Differential Input Impedance > 2.5 MΩ
Measuring Impedance Range 0.3~3 Ω
Base line Impedance Range 200~4 KΩ
Bandwidth 0.1~2.5Hz
Resp. Rate Measuring and Alarm Range
Adult 0 ~ 120 Brpm 
Neo/Ped 0 ~ 150 Brpm 
Resolution 1 Brpm 
Accuracy ±2 Brpm

Apnea Alarm 10 ~ 40 S


NIBP

Method Oscillometric
Mode Manual, Auto, STAT 
Measuring Interval in AUTO Mode 1, 2, 3, 4, 5, 10, 15, 30, 60, 90,120, 180, 240,480 (Min)
Measuring Period in STAT Mode 5 Min
Pulse Rate Range 40 ~ 240 bpm
Alarm Type SYS, DIA, MEAN

Measuring and alarm range Adult Mode
SYS 40 ~ 270 mmHg 
DIA 10 ~ 215 mmHg 
MEAN 20 ~ 235 mmHg
Pediatric Mode
SYS 40 ~ 200 mmHg 
DIA 10 ~ 150 mmHg 
MEAN 20 ~ 165 mmHg
Neonatal Mode
SYS 40 ~ 135 mmHg 
DIA 10 ~ 100 mmHg 
MEAN 20 ~ 110 mmHg
Resolution 1mmHg

Accuracy Maximum Mean error ±5mmHg
Maximum Standard deviation ±8mmHg
Overpressure Protection Adult Mode 297±3 mmHg 
Pediatric Mode 240±3 mmHg 
Neonatal Mode 147±3 mmHg

SpO2
Measuring Range 0 ~ 100 % 
Alarm Range 0 ~ 100 % 
Resolution 1 %
Accuracy 70% ~ 100% 2 %
0% ~ 69% unspecified
Actualization intervalabout 1 Sec. 
Alarm Delay 10 Sec.
Pulse Rate Measuring and Alarm Range 20~300 bpm
Resolution 1bpm
Accuracy ±3bpm


TEMP

Channel 2
Measuring and Alarm Range 0 ~ 50 ºC
Resolution 0.1 ºC
Accuracy ±0.2 ºC
Actualization intervalabout 1 Sec.
Average Time Constant < 10 Sec.

IBP

Label ART, PA, CVP, RAP, LAP, ICP, P1, P2
Measuring and alarm range ART 0 ~ 300 mmHg 
PA -6 ~ 120 mmHg
CVP/RAP/LAP/ICP-10 ~ 40 mmHg
P1 / P2-10 ~ 300 mmHg
Press Sensor Sensitivity 5 uV/V/mmHg
Impedance 300-3000Ω

Resolution 1 mmHg
Accuracy ±2% or 1mmHg which is greater
Actualization interval about 1 secretary
Standard: ECG, Respiration, NIBP, SpO2, Pulse Rate, Temperature
Optional: Nellcor SpO2, EtCO 2, IBP, Thermal Recorder


Picture of patient monitor:
Sy-C041 Guangzhou 12.1 Inch Portable Patient Monitors Bedside Monitor

Other related products/Main products:

Sy-C041 Guangzhou 12.1 Inch Portable Patient Monitors Bedside Monitor


FAQ:

Q: How to purchase your products ?
A: You can contact with us and purchase from our company directly. Normal procedure is: offer, sign contract, payment and shipment.
 
Q: What's the warranty for the products ?
A: The free warranty is one year from the date of commissioning qualified. However, we will still provide good after-sales service after warranty period.
 

Q: Can we visit your factory ?
A: Of course, welcome to visit our factory if you come to China.
 
Q: How long is the validity of quotation ?
A: Generally, our price is valid within one month from the date of quotation. The 
price will be adjusted appropriately as the price fluctuation of raw material in 
the market.
 
Q: What's the production date after we confirm the order ?
A: This depends on the quantity. Normally, for the mass production, we need about 
7-10 days to finish the production.

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours