Name: 3 channel ECG machine
Portable digital 3-channel ECG machine with modern design. Easy to use with a membrane keyboard. ECG data storage. Automatic ECG data interpretation. Built-in battery and automatic switch-over of power supply. Built-in thermal printer. Data transmission to PC.
Number of channels: 3 channel
1.3 channel ECG machine with interpretation
2.5.0" color TFT LCD display
3.Simultaneous 12 leads acquisition and 1, 1+1, 3 channel (Manual/Auto) recording with high resolution thermal printer
4.Manual/Auto working modes
5.Use digital isolation technology and digital signal processing
6.Baseline stabilization inspection
7.Full alphanumeric silicon keyboard
8.Support U disk storage
Lead: Standard 12 leads
Acquisition: Simultaneous 12leads
A/D Converter: 14bit
Sampling Rate: 1000Hz
Working Mode: Manual/Auto
Interference Filter: AC Filter and EMG Filter
CMMR: ≥100dB (with AC filter)
Input Circuit: Floating, protection circuit against defibrillator effect
Input Circuit Current: ≤0.1μA
Input Impedance: ≥50MΩ
Patient Current Leakage: <10μA
Calibrating Voltage: 1mV±2%
Skin Voltage Tolerance: ≥±500mV
Time Constant: ≥3.2s
Frequency Response: 0.05 Hz~250Hz
Noise Level: <15μVp-p
Sensitivity Threshold: ≤20μV
Signal Channel Interference: ≤0.5mm
Printer: Thermal printer
Paper: 80mmx20m, roll
Page Speed: 6.25, 12.5, 25, 50mm/s (±3%)
Sensitivity Printer: 10mm/mV (AUTO), 2.5, 5, 10, 20mm/mV
CPU: 32 bits
Safe Class: GB9706.1, Class I, Type CF
Power Supply: AC 220V (±10%), 50Hz±1Hz, Power ≤60VA
AC 85~265V, 50/60Hz
DC14.8V (2200mAh), rechargeable Li-ion battery
Weight: 1.45kg (with battery)
Grand Medical Introduction
Grand Medical is a merged group.( the premier founder is YUDA medical group). It is established in 1992. The factory is located at Yanzhou economic development zone, Shandong Province, China. In 1992 year, YUDA medical group established, by producing hospital beds and medical carts.
We accumulated rich experience and technology. In 1998, we begin to produce OR equipment, like operating lamp, operating table and medical pendant. Since 2009, we constanly invested more than 30 million dollars on modern factory workshops to improve the production technology for hospital furniture, OR equipment, and ICU equipment, and R&D on medical imaging radiology, like digital X-ray imaging machine, monitor and ultrasound machine.Since 2015 year, we became largest medical manufacture group in North China, covers more than 480,000 square meters factory, with 38 workshops, and globally marketing system.
In the year 2020, Grand Medical Group, by inner prdoucts workflow growth, strategic merger and with the third factories participation, becone an extensive medical coverage manufacture enterprise. With more than 30years experience, we are equipped to serve every possible global heatlh programme and cater for every medical supply need that our customer may have.
Why choose GRAND?
1.GRAND Medical is a new merged medical manufacture, we are the manufacture, the former brand is YUDA. We are the largest medical manufacture in North China. We have 4 factories, 39 workshops, more than 200 workers.
2.GRAND Medical group is a famous leading brand in China, especially we are very strong on operating room equipment, like operating lamp, operating table and hospital furniture.
3.By using 10 years, Grand medical group producing the world leading dynamic holter ECG, and we are doing more better patient monitors with the USA engineers.
4.We only accept serious buyer. During Carona virus, Grand Medical Group produced surgical and medical face masks, face shields, UV air sterile machine and hospital beds, Grand and YUDA successfully joined MOH tenders in a large variety medical supply.
Q: Are you manufacturer ?
A: Yes, we are factory. we have our own R&D team and sales team,We provide you one-stop service.
Q: Do you have CE,ISO13485?
A: Yes,our products are approved by CE,ISO13485
Q: Is OEM &ODM available in your factory ?
A: Yes, you just offer us necessary documents and then we will produce the products as your requirements.
Q: What is your Payment term?
A: 1.L/C at sight;
2.T/T:30% deposit by T/T,70%balance by T/T before shipment
3.Trade term:EXW, FOBShanghai or CIF&CFR
Q: What is your Packing details?
A: 1.Wooden case or carton package,standard export packages
2.All of the productions are inspected carfully by QC before delivery.
Q: What is your Delivery time?
A: Usually, we make merchandise inventory, if we have the products in stock,The delivery time is5-10 days after receiving the deposit;
If we don't have the products in stock, we will arrange the production right now, the delivery time will be 20-30days,It depends on the quantity of order
Q: What is your Min.order?
A: There's no minimum quantity