Instruction:
AcuitSign M8 is a High Acuity 17" Multi-Parameter Modular Patient Monitor, which can offer multiple parameter modules to choose from, adapting to the flexible parameter combination requirements in high acuity applications. With its plug-and-play modules, our modular patient monitor is able to monitor a wide range of parameters simultaneously, such as ECG, RESP, SpO2, NIBP, 2 TEMP, IBP, EtCO2, BIS, EEG, CO, ICG, AG etc adapting from critical cares to anesthesia monitoring. It also integrates parameter measuring module call EMS with full touch display and recorder in one device to form a compact and portable device. At the same time, with its built-in replaceable battery delivering anuninterrupted monitoring during patient transfer. Application: It suitable for bedside, operation room, ICU, CCU etc.
 

 

Technical Specifications of AcuitSign M8:

Size and Weight
-Size: 434mm×389mm×206mm
-Weight: <=11kg
-Standard module slot: 4
-Additional module rack Slot: 1

Power supply:
-Power Voltage: AC 100-240V 50/60Hz
-Power Input: <=150VA
-Input Current:1.7~0.8V
-Safety class: Category I

Display:
-17" Color Anti-glare TFT-LCD
-Resolution:1280×1024 pixels

Battery:
-Type: Rechargeable Lithium battery,11.1V/4.0AH
-Operating time under the normal use and full charge:>=60minutes
(2 batteries for 120 minutes)

Recorder:
-Method: Thermal dot array
-Paper width:50mm(1.97 in)
-Paper length:15m
-Paper Speed:12.5/25/50(mm/sec)
-Traces: Maximum 3 tracks
-Recording way: Real-time recording, Periodic recording, Alarm recording

Alarm:
-Level: Low, medium and high
-Indication: Auditory and visual
-Patient Physiological Alarm Light color: Yellow & Red:
-Equipment Technical Alarm Light color: Blue
-Supports Pitch Tone and multi-level volume;
-Supports custom arrhythmia tone

Input device:
-Touch button: standard config, support operation of shortcut menu.
-knob: standard config
-Mouse input: Support
-Keyboard input: Support

System Output & Extensible Interfaces:
-Ethernet Network:2 Standard RJ45 socket
-Defibrillation Output:1 RJ11 socket
-Nurse Call:1 BNC socket
-Video Output:1 DVI port,1VGA port
-USB1.1 port:6
-Auxiliary Module Rack connector.1
-SD memory card:2G (standard config)
-Analog Output(ECG or IBP):Option

Trend & Reviewing:
-Trend:168 hours
-NIBP measurement reviewing:1000 groups
-ARR event:128 groups of ARR event and the associated waveform
-Alarm events:128 groups of parameter alarm events and associated parameter
-Waveform at the alarm moment
Holographic waveform: The storage time depends on the stored waveforms and
The quantity of them.

Environment:
-Operating temperature:0~+40ºC
-Storage temperature:-20ºC to +50ºC
-Operating humisity:15%to85%(non condensing)
-Storage humidity :10% to 93%(non condensing)
-Operating atmospheric pressure:860hPa to 1060hPa
-Storage atmospheric pressure:500hPa to 1060hPa

Safety:
-IEC60601-1 Approved, CE marking according to MDD93/42/EEC

ECG:
-Lead Mode:3-leads ECG input
5-leads ECG input
12-leads ECG input
-Lead selection: I,II,III
I,II,III, aVR,aVL,aVF,V-
I,II,III, aVR,aVL,aVF,V1~V6(option)
-Gain: 2.5mm/mV(×0.25), 5mm/mV(×0.5), 10mm/mV(×1),
20mm/mV(×2), 40mm/mV(×4),Auto
-RR: Monitor mode>=105dB
Surgery mode<=105dB
Diagnostic mode>=90dB
-Frequency response(-3d B):
Monitor mode 0.5~40Hz
Surgery mode 1~25Hz
Diagnostic mode 0.05~150Hz
-input impedance: >=5.0Mohm
-ECG signal range:±10.0mV
-Electrode offset potential: ±500mV
-Patient Leakage Current:<10uA
-Standardizing signal:1mV±5%
-Baseline recovery:<5s after Defibrillation.(Mon or Surg mode)
-Indication of electrode separation: Every electrode(exclusive of RL)
-Protection: Breakdown Voltage 4000AVC 50/60Hz;defibrillator proof
-Sweep speed:12.5mm/s,25mm/s,50mm/s

HR
-Range: Adult 10~300bpm
Pediatric & Neonate:10~350bpm
-Refreshing time:<=50 bpm Per2 pulses
50~120bpm per 4 pulses
>=120bpm per 6 pulses
-Resolution: 1bpm
-Accuracy: ±1% or ±1bpm,whichever is greater

ST segment:
-Measurement range:-2.0mV~2.0mV
-Accuracy:-0.8mV~0.8mV: ±0.02mV or ±10% whichever is greater
Over ±0.8mV:unspecified
-Resolution:0.01mV

RESP:
-Method: Thoracic impedance
-Lead Selected from: I(RA-LA) or II(RA-LL);Default:I
-Gain: ×0.25, ×1, ×2, ×4
-Bandwidth:0.25Hz to 2.0Hz (-3dB)
-Sweep Speed: 6.25mm/s,12.5mm/s,25mm/s
-Measurement Range:0~150 rpm
-Resolution: 1rpm
-Accuracy: ±2rpm or 2% whichever is greater
-Delay of Apnea Alarm:10s,15s,25s,30s,35s,40s,45s,50s,55s,60s

NIBP:
-Way of measurement: Automatic oscillometry
-Range of measurement:
Adult: SYS 30~270mmHg
DIA 10~220mmHg
MAP 20~235mmHg
Child: SYS 30~235mmHg
DIA 10~220mmHg
MAP 20~225mmHg

Neonate:
SYS 30~135mmHg
DIA 10~100mmHg
MAP 20~125mmHg
-Cuff pressure range:0~300mmHg
-Resolution:1mmHg
-Pressure Accuracy: Static:±2% or ±3mmHg,whichecer is greater
Clinical: ±5mmHg average error
Standard deviation:<=-8mmHg
-Unit: mmHg, kPa
-Measurement mode: Manual, Auto, STAT
-Intervals for AUTO measurement time:1,2,3,4,5,10,15,30,60,90 minutes;
2,4,8,12hours
-STAT mode cycle time: keep 5 minutes, at 5 seconds interval.
-Overpressure Protection: Hardware and software double protections
-Pulse rate range:40~240bpm

Standard SpO2(Digital)
-Measurement Range:0~100%
-Resolution:1%
-Accuracy: At70~100%,±2%
At0~69%,unspecified
PR
-Measurement Range:25~255bpm
-Resolution:1bpm
-Accuracy: ±1% or ±1bpm,whichever is greater

Nellcor-SpO2
-Measurement Range:0~100%
-Resolution:1%
-Accuracy:At70~100%:±2%(Adult)
At70~100%:±3%(Neonate)
At70~100%:±2%(Low Perfusion)
At0~69%,unspecified
PR
-Measurement Range:20~300bpm
-Resolution:1bpm
-Accuracy: 20bpm to 250bpm: ±3bpm
251bpm to 300bpm: unspecified

Masimo-SpO2
-Measurement Range:0% to 100%
-Resolution:1%
-Accuracy: 70% to 100%:±2%(adult/pediatric,non-motion conditions)
70% to 100%:±3%(neonate,non-motion conditions)
70% to 100%:±3%(motion conditions)
0% to 69%, unspecified
-Average time:2-4s,4-6s,8s,10s,12s,14s,16s
PR
-Measurement Range:25bpm to 240bpm
-Accuracy: ±3bpm(non-motion conditions)
±5bpm(motion conditions)

Multi Gas:
-Measure method: Infrared spectrum -Fi and ET values: CO2 ,N2O ,O2 ,AG(HAL,ISO,NEF,SEV,DES) -Resolution:1% -Unit:% -Calibration: Room air calibration automatically when changing airway Adapter (<5 sec) -Warm-up time:<10S,full accuracy within 1min -Measurement and alarm range of AG -Gas Range Accuracy CO2 0-10% ±(0.3% ABS+4%REL) N2O 0-100% ±(2% ABS+8%REL) O2 10-100% ±(2% ABS+2%REL) HAL,ISO,ENF 0-5% ±(0.15% ABS+10%REL) SEV 0-8% ±(0.15% ABS+10%REL) DES 0-18% ±(0.15% ABS+10%REL) -awRR measurement range: 0~150rpm -awRR measurement Accuracy: ±1rpm -Rise time(flowing speed 10I/min)CO2<=90ms O2<=300ms N2O<=300ms Hal,Iso,Enf,Sev,Des<=300ms -Total system response time :<1seconds Noninvasive Cardio Output (ICG): Method: Measurement of thoracic electrical bioimpedanc -Measurement Range:HR:40~250bpm SV:5~250ml SI:5~125ml/m2 C.O.:1.4~15L/mm TFC:15~143KΩ -Accuracy: HR±2bpm SV: unspecified C.O unspecified -Alarm range: C.L.:0.0L/min/m2 to 15.0 L/min/m2 continuously adjustable TFC: 10/KΩ to 150/kΩ continuously adjustable. BIS -More detail please refer to BIS Specification CO -More detail please refer to CO Specification Mainunit of AcuitSign M8: Mainunit: 17"Anti-glare TFT-LCD display 4 Standard module slot, 1 Additional module rack slot (for EMS/MMS all-in-one module),13 Touch buttons,2 RJ45 internet socket, 1 Defibrillation Output, 1 Nurse Call socket, 1 VGA port, 6 USB1.1 port, 1 Auxiliary Module Rack connector, 2G SD memory card,1 Lithium battery (11.1V40Ah). Option of AcuitSign M8: Module Optio: 12 types of EMS modules,12 types of MMS modules, Sidesteam CO2 module, Microstream CO2 module, Mainstream CO2 module, AG module,IBP module, Temp module, Nellcor SpO2 module, Masimo SpO2 module, BIS module,CO module,ICG module. Module Rack: Auxiliary Module Rack Navigating: USB compatible mouse and keyboard. Printing: 3 Channel thermal recorder Mounting: Rollin gstand, Wall mount Battery: 11.1V/4.0AH Rechargeable Lithium Battery (max 2 pcs), Other options: Extemal Display, Wireless Lan, Extensive Memory card, Analog Output (ECG or IBP), Full Touch Screen, EMS Charging Stand , HL7 Output, DVI port.

Physical Identity:
Size and Weight Product size: 43.4x38.9x20.6cm
Packing size: 63x43x56cm Net weight: 14kg
Gross weight: 17kg
Standard module slot:4
Additional module rack Slot:1
 

 

 

  

1. Who we are?Where we are from? Where we service?

We are Sino-Hero (Shenzhen) Bio-Medical Electronics Co., Ltd, founded in 2003, is one of the leading manufactures for medical devices and medical accessories in China. We are based in Shenzhen,Guangdong, China, start from 2004, WE service more than 100 country: Northern Europe(10.00%),Western Europe(10.00%),EasternAsia(10.00%),South Asia(10.00%),Southern Europe(10.00%),Southeast Asia(10.00%),Eastern Europe(10.00%),South America(10.00%),North America(10.00%),Mid East(5.00%),Africa(5.00%). There are total about 11-50 people in our office.

2.What we have?How can we guarantee quality?

We are professional in medical more than 16 Years,We have TUV CE a& ISO13485 Certifications for our products. All of our items Always a pre-production sample before mass production; All items get 100% checking before in our stock; Always final Inspection before shipment.

3.What items we could provide for you?

SINO-HERO business activities focus on product lines below: 1) A wide range of versatile Patient Monitors suitable for all hospital setting, including OR, ER, Recovery Room, General Patient ward 2)Monitoring Accessories maximal compatibility for all major brands (GE, Philips, Schiller, Collin, CSI, Critikon, Nihon Kohden, etc.): including, Reusable Spo2 Sensor & Ext-Cable, ECG cable, EKG cable, NIBP cuff, Air-hose, Temp probe 3) ECG machine and its accessories 4) Infusion pump and Syringe Pump system 5) Obstetrical product: Fetal Doppler, Colposcope 6) Medical Imaging Systems:Color Ultrasound Scanner, Portable Ultrasound System 7) A wide range of compatible ultrasound probes and repairable ultrasound probes.

4. Why should you buy from us not from other suppliers?

SINHERO's products are installed in over 50 countries, including US, UK, Germany, France, Italy, Spain, etc. and the percentage of
total sales from Europe has been growing fast.
The main competitive advantages of SINOHERO's products:
a. quality
b. functionality
c. easy maintenance and easy to operate
d. spare parts and consumables at low cost
e. on-time delivery
f. strong after sales technical support
 

5. What services we Can provide for you?

We could provide items with Ready to ship,we also could do OEM,ODM orders,we also welcome you to be our Brand Sinohero Agent to work together with us;

Accepted Delivery Terms: FOB,CIF,EXW,DDU,Express Delivery;
Accepted Payment Currency:USD,EUR,JPY,CAD,AUD,HKD,GBP,CNY;
Accepted Payment Type: T/T,L/C,PayPal,Western Union,Cash,Escrow;
Language Spoken:English,Chinese,Spanish,German,French,Russian